Electromagnetism |
---|
Lenz's law /ˈlɛntsɨz lɔː/ is a common way of understanding how electromagnetic circuits obey Newton's third law and the conservation of energy.[1] Lenz's law is named after Heinrich Lenz, and it says:
An induced electromotive force (emf) always gives rise to a current whose magnetic field opposes the original change in magnetic flux.
Lenz's law is shown with the minus sign in Faraday's law of induction, which indicates that the induced emf () and the change in flux () have opposite signs.[2]
For a rigorous mathematical treatment, see electromagnetic induction and Maxwell's equations.
Contents |
If the magnetic field of current induces another current, , the direction of is opposite that of . If these currents are in two circular conductors and respectively, then the currents and must counter-rotate. The opposing currents will repel each other as a result.
Currents bound inside the atoms of strong magnets can create counter-rotating currents in a copper or aluminum pipe. This is done by dropping the magnet through the pipe. When done, the descent of the magnet is observably slower than when dropped outside the pipe.
In electromagnetism, when charges change positions along electric field lines, work is done on them, whether it involves storing potential energy (negative work) or increasing kinetic energy (positive work).
When net positive work is applied to a charge , it gains momentum. The net work on thereby generates a magnetic field whose strength (in units of magnetic flux density (1 Tesla = 1 volt-second per square meter)) is proportional to the speed increase of . This magnetic field can interact with a neighboring charge , passing on this momentum to it, and in return, loses momentum.
can also act on in a similar manner, by which it returns some of the emf that it received from . This back-and-forth component of emf contributes to magnetic inductance. The closer that and are, the greater the effect. When is inside a conductive medium such as a thick slab made of copper or aluminum, it more readily reacts to the emf sent to it by . The energy of is not "instantly" consumed only as heat generated by the current of but is also stored in two opposing magnetic fields. The energy density of magnetic fields tends to vary by the square of the magnetic field's intensity; however, in the case of magnetically non-linear materials such as ferromagnets and superconductors, this relationship breaks down.
The electric field stores energy. The energy density of the electric field is given by:
In general the incremental amount of work per unit volume δW needed to cause a small change of magnetic field δB is:
Momentum must be conserved in the process, so if is pushed in one direction, then ought to be pushed in the other direction by the same force at the same time. However, the situation becomes more complicated when the finite speed of electromagnetic wave propagation is introduced (see retarded potential). This means that for a brief period of time, the total momentum of the two charges are not conserved, implying that the difference should be accounted for by momentum in the fields, as speculated by Richard P. Feynman.[3] Famous 19th century electrodynamicist James Clerk Maxwell called this the "electromagnetic momentum", although this idea is not generally accepted as a part of standard curricula in physics classes as of 2010.[4] Yet, such a treatment of fields may be necessary in the case of applying Lenz's law to opposite charges. It is normally assumed that the charges in question are like charges. If they are not, such as a proton and an electron, the interaction is different. An electron generating a magnetic field would generate an emf that causes a proton to change its motion in the same direction as the electron. At first, this might seem to violate the law of conservation of momentum, but of course, such an interaction indeed conserves momentum once taking into account the momentum of electromagnetic fields.